BionX Adhesive Cable SupportThese cable connectors guide the cables from the control panel, and keep them against the frame of your bike for a clean look, and no snags. Self-adhesive with zip ties. BionX Part Number: 01-1199
Bionx Connection CoversBlack neoprene connection covers for motor cable connectors on BionX Electric Bike Kits. Includes one each: 50mm x 100mm and 50mm x 50mm Attaches with Velcro. BionX Part Number: 01-1158
BionX G2 Rubber ShimsRubber shims to fit the G2 Console Handlebar Clip to the diameter of the handlebar. BionX Part Number: 01-3419
BionX Standard Magnetic Brake SwitchA replacement standard magnetic brake switch/inhibitor for BionX Electric Bike Kits. The sensor and magnet are installed at the brake lever. BionX Part Number: 01-1579
BionX Rear Rack with Docking StationThis rear rack for a BionX PL 350HT kit with a rack-mounted battery gives you usable rack space above the battery. The BionX Battery for Rear Rack Mounted Kits docks and connects easily.
BionX Torque BlockerThe BionX Torque Blocker is an axle washer that correctly orients the notch on the BionX axle. For BionX SL 350HT Electric Bike Conversion Kits only.
BionX Ultra Grip Torque IsolatorThe BionX Ultra Grip Torque Isolator. Compatible with older BionX systems with the classic G1 motor: PL 350 HT L, PL 350 HT RR L, PL 350 HT RR M, and PL 250 M.
Bionx Communication Cable ExtensionSupplement the communication cable of your PL 350HT or PL 250HT and other BionX kits. For bikes with unusual geometry or long cable runs, such as tandems, recumbents, and cargo bikes.
BionX DC Out Male Connector with Wire LeadConnect dyno lights to your BionX PL 350HT (37V) or PL 250HT (24V) kits. The male connector plugs into the DC power jack on the BionX system. The wire leads are spliced onto your lighting wires.
Bionx Motor/Communication Cable ExtensionSupplement the motor or communication cable of your PL 350HT or PL 250HT and other BionX kits. For bikes with unusual geometry or long cable runs, such as tandems, recumbents, and cargo bikes.
BionX Brake Lever Magnet for SensorThis magnet is paired with BionX magnetic brake switch to detect when the brakes are engaged. The brake/regenerative modes of BionX are determined by the proximity of the magnet to the sensor.
Tektro Linear Pull Brake Lever Set for eBikesTektro brake levers with integrated sensors for engaging and disengaging the BionX brakes and regeneration mode. Circumvents the guesswork and super glue of installing BionX magnetic brake switches.